Vacuum pump in vacuum grouting technology

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view

Vacuum pump in vacuum grouting technology

Vacuum pump in vacuum grouting technology

Vacuum grouting is a commonly used technology in bridge concrete structure, and grouting is a key link. The traditional grouting technology will cause corrosion and component expansion crack after long-term use, which has a great potential safety hazard.

Vacuum grouting is a new technology in the construction of post tensioned prestressed concrete structure, which solves the problems left by the traditional grouting technology to a large extent. The adoption of vacuum grouting technology is an effective measure to improve the safety and durability of post tensioned prestressed concrete structure.

The main application of vacuum pump in vacuum grouting is that one end of the duct is vacuumized by vacuum pump to produce a vacuum of about - 0.1pA, and then the optimized special cement slurry is poured from the other end of the duct to fill the whole duct with a positive pressure of ≤ 0.7MPa to improve the fullness and compactness of the prestressed duct grouting.

Main technical advantages

1. In the vacuum state, the air and water in the duct and the bubbles mixed in the cement slurry are eliminated to reduce the porosity and bleeding.

2. In the process of grouting, the duct has good sealing performance, so that the slurry can keep pressure and fill the whole duct.

3. The optimization of technology and slurry can eliminate the generation of cracks and ensure the fullness and strength of grouting.

4. The vacuum grouting process is a continuous and rapid process, which shortens the grouting time.

[url=]Water Ring Vacuum Pump[/url]

[url=]Water Ring Vacuum Pump manufacturers[/url]

[url=]What is water ring vacuum pump[/url]